1.The odd back veneer from electronic detecting,Cutting jointing by glue paper to one piece and loading to stacker that all processes are operating by one complete set composer.
2.Using NC electronic thickness detector to reduce odd bacd veneer to minimum wasting 1mm to 5mm from edges or flaw, and the minoplate over 50 mm is acaiable for use.
3.You can easily adjust the 6' ~ 8' size to match your requirment for use.

 

Model

GVC-4

GVC-4T (With Tenderizer)
Working Veneer Width (mm)

900~1270

900~1270
Working Veneer Length (mm)

900~1600

900~1600
Working Veneer Thickness (mm)
1.2~4.0
1.2~4.0

Length of Knife (mm)

1350

1350

Feeding Speed (M/Min)

30

30

Thickness Detecting (Points)

9

5
Power Requirement (KVA)
4
4

Machine Dimension (mm)

L

7523

8873

W
3280
3280
H
1900
1900

Machine Weight (KGS)

4200

4500

Shipment Measurement (M3)
18
18

Optional Accessories: Air compressor with 2.2KW motot (require 6kg/cm2 air
pressure 50litres/min. free air)

Copyright © 2005 Taiwan 承億機械股份有限公司 All Rights Reserved
1F,No.326,Wen Heng Road,Feng Shan City,Kaohsiung Hsicn,Taiwan.R.O.C.
TEL:+886-7-7330576 ; FAX:+886-7-7336216
E-Mail : chenemc@ms35.hinet.net
Website designed & hosted by Commerce Online!