The full automatic Veneer Core Builder is specialized in cutting and jointing the monoplate veneer from 1.2mm to 4.0mm and simple operating by one worker, Which from imfeed conveyor, electronic veneer thickness detector, Cutting and jointing by hot melt glue to desired 4'X 8' or 3'X 6' and loading to automatic stacker.That all processes are operating by one perfect Veneer Core Builder.

 

Uniform thickenss is indispensble for high qualiy core veneers, Thickness detection on Chrome-Coated roll assures very accurate thickness control all the time using NC electronic thickness detector to reduce odd core veneer to minimum wasting 1mm to 5mm from edges or flaw.And the monoplate over 80mm is available for
use.


 
Hot melt edge-gluing and glue-coated string appplcations enable to deminish preductioncost.


 
Automatic stacker by the upper belts and bottom rolls for conveying on fixed position so that it can keep the plates neat by fare and after sides , fast and quiet to operate.

 
There are two cooling rolls pressing to make fast cooling for the Glue-coated string after it was spread with hot melting glue and prevent the plates from adhered at the string commecting spats,And synchro drive system is used to make it start simultaneously on both end that can assure,The single plates are put together precisely (can reduce superimposing) and their seams cam be adjustable for 0 - 1.5mm by the plate thickness.






Model

NCB-4

NCB-4T
(With Tenderizer)

NCB-5

NCB-6

Working Veneer Width (mm)

960~1270

960~1270

1200~1600

1200~1900

Working Veneer Length (mm)

1900~2560

1900~2560

2500~3200

900~1100

Working veneer Thickness (mm)

1.2~4.0

1.2~4.0

1.2~4.0

1.2~4.0

Length of Knife (mm)

1350

1350

1660

1950

Feeding Speed (M/Min)

30

30

28

28

Thickness Detecting (Points)

20

20

22

28

Over Thickness Detecting (Points)

3

3

3

3

Power Requirement (KVA)

22

25

27

30

Edge-gluing (Points)

30

30

36

45

Machine Dimension (mm)
L

9600

11565

11000

7705

M

3200

3200

3500

4180

H

2500

2500

2500

2500

Machine Weight (KGS)

7500

9000

8000

8500

Shipment Measurement (M3)

50

62

50

55

Optional Accessories :Air compressor with 3.7 kW motor(require 6kg/cm2 air
pressure 60 litres/min free air.

 

Copyright © 2005 Taiwan 承億機械股份有限公司 All Rights Reserved
1F,No.326,Wen Heng Road,Feng Shan City,Kaohsiung Hsicn,Taiwan.R.O.C.
TEL:+886-7-7330576 ; FAX:+886-7-7336216
E-Mail : chenemc@ms35.hinet.net
Website designed & hosted by Commerce Online!